ROUTER BIT STRAIGHT 1/4' (6.35cm)

Straight Router Bit Two Flute cuttingDiameter: 1/4" (6.35cm) Classification: Standard (Yellow) --> The Two-Flute Straight Router Bit is a core staple for any woodworker who demands a fine finish on basic, square-sided cuts. Engineered with two precision-ground carbide-tipped cuttingedges, this bit provides superior balance and minimal vibration by allowing two cuts per revolution. This geometry results in an exceptionally smooth and clean surface ideal for applications where the final appearance is critical. It is the perfect choice for routing precise grooves, dadoes, and rabbets in hardwood, softwood, plywood, and various composite materials. While the two flutes offer a cleaner cut than single-flute alternatives, requiring a slightly slower feed rate for optimal chip clearance, the trade-off is a high-quality, professional finish, making it indispensable for joinery work, cabinet construction, and general-purpose edge-routing. Application: router-bitsare for use with router machines only. Be sure that at least 3/4 of the shaft length is inserted into the router collet. Do not 'bottom-out' the bit in the collet. The shank should be 1/8' from the bottom of the collet. Route in two or more passes when large amounts of stock must be removed. Carpenters Craftsmen Hobbyists Woodworking DIY